DB25

PCB or DIN Rail mounting DB15 D-Sub adaptor / breakout board with all pins plus shield connected to screw or spring terminal blocks, allowing simple and quick connections for prototyping or permanent installation.

Three versions are available :
  • Male :     with Captive screws for use with a mating connector that already has Screwlock / Jack screws fitted 
  • Female : with Screwlock / Jack screws for mounting the adaptor board to a wall box or panel that has a cut-out
  • Both :     Screwlock / Jack screws fitted for use with a suitable cable (not supplied)

Screwlock / Jack screws are the hex standoffs often fitted on D-SUB connectors. They are threaded for #4-40 UNC screws. They are for connecting to a cable which has thumbscrews or for mounting in a wall plate / panel which has a cut-out. 

Captive screws are male #4-40 UNC screws coming out of the face of the connector to accommodate direct mounting to a mating connector with jack screws.

Features

  • Screw / Spring terminal for all 15 pins, plus shield
  • Screw / Spring terminal suitable for wire size from 0.05mm2 (30awg) to 2.0mm(14awg)
  • PCB Mounting holes 4x M3 (3mm)
  • Optional DIN rail mounting for width 35 / 32 / 15mm rails

3  Products


Male DB25 D-Sub Adapter D9

DB25 D-Sub Adapter M/F

DB25 D-Sub adapter / breakout board with 25 pins connected to screw terminal blocks, allowing simple and quick connections for prototyping or permanen...
£9.75
View details